This website uses cookies primarily for visitor analytics. Certain pages will ask you to fill in contact details to receive additional information. On these pages you have the option of having the site log your details for future visits. Indicating you want the site to remember your details will place a cookie on your device. To view our full cookie policy, please click here. You can also view it at any time by going to our Contact Us page.

Turnkey automation project provided at sugar mill

30 July 2010

Famous across the world for its traditional aguardente (a strong alcoholic beverage obtained from sugarcane) the Ypióca group is investing in a new market: ethanol. The company has just inaugurated the Jaguaruana mill in the state of Ceará. Brazil. This has the capacity to produce between 40 and 60 million litres/year of ethanol, around 90 million litres/year of cachaça (another name for aguardente), as well as the capability to produce neutral alcohol.

Turnkey automation project provided at sugar mill
Turnkey automation project provided at sugar mill

Totally automated, the new plant is the result of an investment of approximately US$ 145,580 mil. It’s one of the most modern in the world and it’s strategic for the company. With the new mill, the goal is to supply one third of the market of Ceará with ethanol for the next three to four- years, and increase the turnover of the group by around 20%. Today, Ceará imports 160 million litres/year of ethanol and practically all the product goes to gas pumps.

Partners for over thirty- years, for this new challenge Ypióca has once again turned to WEG to provide automation solutions, with key products in operation from the planting of the sugarcane (such as the controlling panels of the water collection and irrigation pumps, for example) to the mills and plants. "At the Jaguaruana mill, the whole automation project is WEG," said the engineering manager of Ypióca, José Paulo dos Santos. "WEG equipment is also playing a key role in power generation, drives and protection of the motors that drive the machines and equipment."

The combination of WEG’s CFW-11M (modular drive) (427 A) and the 500 HP 690V HGF Line motor drives the twin mills at Jaguaruana. The CFW-11 M is the new generation of WEG frequency inverters for high voltages available in powers from 400HP to 2,500 HP and voltages from 380V to 690V with 6 and 12 pulse or regenerative input rectifiers.

The Jaguaruana mill also has two sets of CFW-11M 811A inverters on the defiber, blades 1 and 2, to drive the 1100 HP, 900 HP and 500 HP motors, and several WEG transformers: special (1000kVA / 2000kVA / 2500kVA / 3500kVA) units (690V secondary voltage).

The Engineering manager of Ypióca says that the competition to choose the supplier was fierce, but due to the exemplary after sales service and the 100% Brazilian technology that Ypióca has known for a long time, the decision was to extend the partnership. "WEG has excellent customer service; there’s no other in the country to match it," said José Paulo dos Santos.


Contact Details and Archive...

Print this page | E-mail this page

CSA Sira Test