This website uses cookies primarily for visitor analytics. Certain pages will ask you to fill in contact details to receive additional information. On these pages you have the option of having the site log your details for future visits. Indicating you want the site to remember your details will place a cookie on your device. To view our full cookie policy, please click here. You can also view it at any time by going to our Contact Us page.

E2S introduces SIL 2 certified BEx alarm horn sounders and Xenon strobe beacons

11 December 2015

E2S Warning Signals, the leading independent audible and visual warning signals manufacturer, has introduced a SIL 2 version of its flagship BEx range of explosion proof alarm horn sounders and Xenon strobe beacons. The new IECEx and ATEX certified BEx horns and strobes are the perfect solution for designers and integrators of SIL 2 systems; they are designed and tested to ensure a 99.9% reliability rate, bringing plant safety to new levels. 

To meet the requirements of SIL 2, a combination of software and hardware in the new units accurately monitors and interprets the sound output of the horn or the light output from the Xenon strobe to check it is functioning correctly. The fault monitoring reports back to the control panel utilising either separate fault contacts or by the introduction to the monitoring circuit of a series resistor. Using the series resistor facility eliminates the need for any additional cables and can be used in a standard two-wire arrangement.

The key benefits are:
• The correct functioning of the signalling device function is checked and communicated to the control panel
• Time consuming physical inspections are eliminated, reducing running cost
• Plant safety is increased because all devices are confirmed to be operating.
• The BEx units are designed to integrate seamlessly into the SIL 2 environment
A detailed technical and installation manual, downloadable from www.e2s.com/SIL2, been published to assist system designers and engineers.

In high risk industries such oil, gas and petrochemicals, adopting SIL 2 (Safety Integrity Level) systems is becoming the norm, in particular for the safety-critical fire and gas detection systems. While the fire and gas control panel will normally initiate automatic process shutdown procedures in the event of an alarm, the audible and visual warning devices are critical components in ensuring that personnel are warned in an emergency.


Contact Details and Archive...

Print this page | E-mail this page

CSA Sira Test