This website uses cookies primarily for visitor analytics. Certain pages will ask you to fill in contact details to receive additional information. On these pages you have the option of having the site log your details for future visits. Indicating you want the site to remember your details will place a cookie on your device. To view our full cookie policy, please click here. You can also view it at any time by going to our Contact Us page.

Metrix offers a full line of Proximity Probe Sensors and Installation Accessories

15 January 2016

The new Metrix Digital Proximity System (DPS) combines the performance of a fully API 670-compliant proximity measurement system with the flexibility of digital configurability. The Metrix DPS allows a user to configure a 200 mV/mil (8mV/µm) linear output for almost any combination of probe target material, system length, and manufacturer for a proximity probe thrust, radial vibration or speed system.  

Metrix DPS & MX2040 DSC
Metrix DPS & MX2040 DSC

Our system allows you to field-configure, or customize, the proximity probe driver or transmitter for a wide range of probe types, cable lengths and target materials from most manufacturers.

The new MX8030 Proximity Probe and MX8031 Extension Cable System comes standard with VibeLock and Triaxial Cables.

The VibeLock feature provides a secure finger tight no slip connection between the probe cable connector and the extension cable connector. As one tightens the cable connectors, you can feel the ratcheting mechanism work until the connection is finger tight.  No special tools are required.

The Triaxial Cable provides an extra protective barrier for the proximity probe cable system.  The extra layer of protection helps prevent excessive wear during installation and in high vibration areas, as compared to standard coaxial cables. 

Metrix has a full line of Proximity Probe installation accessories.  We have added two new installation products:

The new 5497PM Metrix Reverse Probe Mount system allows you to gap the proximity probe once, so that it can be easily taken out and put back in and obtain the same probe gap.  The gap voltage should always be checked, but you will find that the Metrix Reverse Probe Mount provides very repeatable results.  The 5497PM can be purchased in a variety of configurations – Please see the datasheet on our Website.

The new MX2040 Dynamic Signal Checker (DSC) is an AC sinusoidal driver for loop checking proximity probe systems.  It has a vibration range from 0 to 6 mils pp (0 to 150 µm pp), with four preset settings to ensure what the probe is measuring is reported on your monitoring system and or control system - giving you confidence the entire system is working.

For more detailed information, please visit: www.metrixvibration.com/products/proximity


Contact Details and Archive...

Print this page | E-mail this page

CSA Sira Test