This website uses cookies primarily for visitor analytics. Certain pages will ask you to fill in contact details to receive additional information. On these pages you have the option of having the site log your details for future visits. Indicating you want the site to remember your details will place a cookie on your device. To view our full cookie policy, please click here. You can also view it at any time by going to our Contact Us page.

HART Registered: E018 Flow Monitor / Totalizer - “Explosion Proof” with a capital E

21 February 2017

The Explosion Proof E018 Flow Monitor/Totalizer and the specific Device Description (DD) have been successfully validated by the HART Communication Foundation, thus meeting the requirements to be officially: “HART REGISTERED”. This guarantees it will operate hassle free with all registered "DD enabled host" systems. The specific DD allows access to every single menu setting. 

Fluidwell raises the user-friendly configuration to a new level!

New added value

“HART communication is one of the most popular industrial protocols today, due to the wide installed base of 4 - 20mA systems throughout the world.” says Eric Rath, General Manager of Fluidwell in the Netherlands. “The Explosion proof E018 with HART offers a reliable solution for applications where you want to benefit from the digital communication with intelligent field devices over existing analog loops.

Save time, cost and aggravation with the simple configuration, setup and troubleshooting. Optimize your process by transmitting the accurate measurement values to your smart control / monitoring systems.”

Explosion proof to the max!

The robust Stainless Steel 316L E-Series is designed with a focus on your safety. It’s beyond fulfilling the rules for hazardous area approvals, because the environment is often much tougher than explosion proof requirements demand. Experiencing flaws in your processes due to rain, snow, salty atmospheres (offshore) or early wear? Watch our durable E-Series totalizers deliver accurate measurement while withstanding the harshest conditions and bringing you ease of use.

“A solid die cast aluminum enclosure with the same ingress protection rating is available for cost effective applications.”, Eric adds.

Hazardous area information

The E-Series have been certified according ATEX, IECEx, FM and CSA C-US with an ambient temperature of -40°C to +70°C (-40°F to +158°F).

The ATEX markings are:
- Gas:  II 2 G Ex d IIC T6 Gb
- Dust:  II 2 D Ex tb IIIC T85°C Db

The IECEx markings are: 
- Gas: Ex d IIC T6 Gb
- Dust: Ex tb IIIC T85°C Db

The FM and CSA C-US markings are: 
- XP (Explosion-proof): Class I, Division 1, Grps A, B, C, D.
- DIP (Dust-Ignition-proof): Class II/III, Division 1, Groups E, F and G. Class I, Zone 1, AEx d IIc T6 Gb, Zone 21, AEx tb IIIC T85°C Db.

Your Advantages

* Officially “HART REGISTERED” by the HART Communication Foundation.
* SMART communication over existing, installed base 4 - 20 mA analog instrumentation loops.
* The robust Stainless Steel 316L E-Series is much tougher than explosion proof requirements demand.
 * Galvanically isolated, loop powered 4 - 20mA output according to the linearized flow rate.
 * Programming can be done by your own crew, saving cost and aggravation. Know one, know them all!
 * Resistant to harsh weather conditions (rain, snow, salty atmospheres, temperatures of -40°C/-40°F to +80°C/+178°F).
 * Clear flashing LED backlight in case of an alarm.

Fluidwell bv

Fluidwell bv is located in Veghel, The Netherlands, and is known worldwide for its instrumentation in the field of signal processing, actuation and recording of virtually everything measurable. Fluidwell designs and manufactures a wide range of flow computers, indicators, totalizers, transmitters, monitors and controllers.

For more information: www.fluidwell.com/hazardex-eseries.


Contact Details and Archive...

Print this page | E-mail this page

CSA Sira Test