This website uses cookies primarily for visitor analytics. Certain pages will ask you to fill in contact details to receive additional information. On these pages you have the option of having the site log your details for future visits. Indicating you want the site to remember your details will place a cookie on your device. To view our full cookie policy, please click here. You can also view it at any time by going to our Contact Us page.

New SIL 2 compliant 316L stainless steel call points for onshore and offshore applications

29 January 2019

E2S Warning Signals has announced that its STExCP8 manual call points are SIL2 compliant to IEC 61508, allowing system integrators greater confidence when designing systems requiring an enhanced safety integrity level. The robust devices are part of the comprehensive STEx family of explosion/flameproof audible and visual signalling devices and feature highest grade 316L stainless steel enclosures.

STExCP8 manual call points
STExCP8 manual call points

Designed for installation in the harshest of onshore and offshore environments, the call points and push buttons are IECEx and ATEX approved for use in Zone 1 and 2 hazardous areas for fire and gas alarm systems and emergency shutdown and process control applications. A choice of four operating mechanisms are available: a break glass call point and three push buttons with momentary activation, tool reset latching and dual action manual reset. The break glass unit employs a plastic-coated glass element for operator safety and an optional stainless steel lift flap is available to prevent inadvertent operation.
 
Dual M20 cable entries are provided that can be orientated for top or bottom cable entry with a further M20 entry on the side. All unused entries are fitted as standard with stainless steel blanking plugs; adaptors for ½” NPT, ¾’’ NPT and M25 are also available factory fitted. In addition to a single or double switch option, terminations can be specified as standard DIN rail or the innovative E2S termination board. With dedicated connections, field or factory installed EOL and/or series devices can be removed or changed without disturbing system cabling.
 
The enhanced corrosion resistant 316L marine grade STExCP8 range of call points and push buttons complements the existing lightweight GNExCP6 GRP and BExCP3 copper free marine grade LM6 aluminium alloy families, enabling specifiers to select the most appropriate enclosure material for their installation environment.

Click here for more information on Stex family alarms.


Contact Details and Archive...

Print this page | E-mail this page