This website uses cookies primarily for visitor analytics. Certain pages will ask you to fill in contact details to receive additional information. On these pages you have the option of having the site log your details for future visits. Indicating you want the site to remember your details will place a cookie on your device. To view our full cookie policy, please click here. You can also view it at any time by going to our Contact Us page.

Zone 1 gas detector for inline gas applications

27 April 2009

Extronics has launched the iLEL100 Probe to monitor the flammability of a gas or solvent vapour by insertion into a process or extraction exhaust duct or alternatively to monitor for a range of Toxic Gases.
The probe has been designed to reduce installation and commissioning costs as well as substantial maintenance costs.

Zone 1 gas detector for the measurement of inline gas applications
Zone 1 gas detector for the measurement of inline gas applications

The probe is simple with no pumps, no aspirators, no filters, no narrow bore tubing and long sample lines, no heated line, no coolers or condensate vessels.

The entire probe assembly is manufactured from stainless steel and is positioned in situ hence the sample path is extremely short and the probe is maintained at the process temperature eliminating the need for heated lines or condensate devices, as well as reducing response time to an absolute minimum.

Installation requires only the fitting of a flange at the process analysis point and wiring back to a panel, a calibration nipple on the iLEL100 probe assembly allows gas to be passed across the head of the sensor on a bi-annual basis to check the probe, (depending upon the application) which concludes the extent of the maintenance programme.


Contact Details and Archive...

Print this page | E-mail this page