This website uses cookies primarily for visitor analytics. Certain pages will ask you to fill in contact details to receive additional information. On these pages you have the option of having the site log your details for future visits. Indicating you want the site to remember your details will place a cookie on your device. To view our full cookie policy, please click here. You can also view it at any time by going to our Contact Us page.

Linear charger ICs for single cell lithium-ion batteries

17 June 2009

Torex has unveiled the XC6802 Series of linear charger ICs for single cell lithium-ion batteries. Available in the ultra-small USP-6C package, as well as in standard SOT-25 and SOT-89-5 versions, the XC6802 includes a reference voltage source, battery voltage monitor, driver transistor, constant-current/constant-voltage charge circuit, over heat protection circuit, phase compensation circuit.

Linear charger ICs for single cell lithium-ion batteries
Linear charger ICs for single cell lithium-ion batteries

The battery charge termination voltage is internally set to 4.2V ±0.7% and the trickle charge voltage and accuracy is 2.9V ±3%. In a typical application circuit, when the BAT pin voltage rises above 2.9V, the charger enters into constant-current mode (CC mode) and the battery is charged by the programmed current charge. When the BAT pin voltage reaches 4.2V, the charger enters constant-voltage mode (CV mode) automatically. After this, the charge current drops to a tenth of the programmed charge current and the charge terminates. The charge status output pin, /CHG pin, is capable of checking the device’s charging state while connected to an external LED.

With an external resistor (RSEN) between the ISEN pin and the VSS pin, the charge current can be set anywhere up to a maximum of 800mA.


Contact Details and Archive...

Print this page | E-mail this page