This website uses cookies primarily for visitor analytics. Certain pages will ask you to fill in contact details to receive additional information. On these pages you have the option of having the site log your details for future visits. Indicating you want the site to remember your details will place a cookie on your device. To view our full cookie policy, please click here. You can also view it at any time by going to our Contact Us page.

K Controls launches new valve position monitors for oil, gas and petrochemical industries

13 February 2012

The 007-100 and 007-120 Exd IIC Position Monitors are ATEX and IECEx certified for use in gas Zones 1 and 2 and dust Zones 21 and 22. The CE marked, IP67 enclosures are supplied in either coated aluminium or ANC 4B (316) stainless steel. Metric and NPT cable entries up to M25 and ¾" are available.

The 007-100 is a compact solution that can contain up to 2 switches or a 4-20mA position transmitter
The 007-100 is a compact solution that can contain up to 2 switches or a 4-20mA position transmitter

The products have been designed to accommodate, as an option, the latest version of the top mounted highly visible Klearvision position indicator that can be used in IIC hazardous areas.

The 007-100 is a compact solution that can contain up to 2 switches or a 4-20mA position transmitter. The larger 007-120 can contain up to 4 switches and a 4-20mA position transmitter. 

The 007-120 now carries cCSAus certification marking for use in Canada and the USA. (cCSAus certification of the 007-100 will follow during 2012). 

Designed for use in the oil, gas and petrochemical industries both units can be fitted to a wide range of quarter turn or linear valve actuators. 

There is a very extensive range of monitoring equipment that can be fitted in this new range of Exd IIC Position Monitors.

Switch options include micro switches, hermetically sealed magnetically operated reed switches and standard or failsafe inductive proximity sensors. Potentiometers of various different values can be geared or directly driven. A solenoid back wiring facility can be provided so that switches and solenoid can be wired to the control room via a single multicore cable without the requirement for a separate junction box.

For continuous feedback of valve position or for monitoring the performance of critical emergency shutdown valves during partial stroke testing, 4- 20mA, 4-20mA + HART®, PROFIBUS® PA or FOUNDATION(tm) FIELDBUS position transmitters are available in K4-20 variants.




Contact Details and Archive...

Print this page | E-mail this page