This website uses cookies primarily for visitor analytics. Certain pages will ask you to fill in contact details to receive additional information. On these pages you have the option of having the site log your details for future visits. Indicating you want the site to remember your details will place a cookie on your device. To view our full cookie policy, please click here. You can also view it at any time by going to our Contact Us page.

New SIL3 SAFESERIES safety relays from Weidmüller

11 September 2012

With its new SAFESERIES safety relays, Weidmüller offers modules designed to shut down process industry plant and plant components in the event of an emergency. The G3 coated version is a requirement for applications where there is a high concentration of hydrogen sulphide and it has been tested in accordance with EN 60068-2-60. 

With its new SIL3 SAFESERIES safety relays, Weidmüller offers a module designed to shut down process industry plant and plant components in the event of an emergency
With its new SIL3 SAFESERIES safety relays, Weidmüller offers a module designed to shut down process industry plant and plant components in the event of an emergency

TUV NORD has certified that the SAFESERIES safety relay range fulfils SIL3 requirements in accordance with EN 61508. 

Part of the range, the new SCS 24V DC SIL3 safety relay, is designed to guarantee emergency shutdown of systems and system components operating in the process industries. 

Safety shutdown is critical in process industries because it serves functional safety, for instance in backup systems with high DC voltages. EN 61508 specifies that all devices used in safety circuits must fulfil particularly strict conditions. SIL (Safety Integrity Level) makes it possible to classify corresponding devices according to the reliability of their safety function and the safety oriented design principles that must be maintained in order to minimise the risk of malfunctions. 

The standard EN/IEC 61508 states that functional safety is given when safety systems and organisational measures minimise risk to an acceptable level. In this case, SIL3 relays can be deployed to ensure emergency shutdown. As a rule, operation in low demand mode is sufficient as emergency events are not usually seen as regular occurrences.  However, in some industries, the high demand operating mode can also play a central role in creating functional safety. For instance, overfill protection solutions in tank systems need to ensure control on a permanent basis. 

Whatever the requirements, the new Weidmüller safety relay is more than able to handle the conditions encountered and satisfies the highest demands with proven technology and sophisticated features. 

One such example is the status indicators to indicate that the relay is operating flawlessly: two yellow LEDs, one 'Relay Output' (safety circuit) and one 'Monitor' (monitoring circuit) simplify error analysis considerably. 

Three relays are connected in series in the output of the safety circuit (SIL circuit). This circuit arrangement guarantees reliable isolation in the safety circuit. One of the challenges when deploying safety relays in process engineering and control systems is to accommodate different supply voltages - for example, backup systems are operated with very high DC voltages.  It is for this reason that Weidmüller has added a monitoring circuit to its safety relay which is equipped with a wide voltage input, and is a highly adept method to meet this requirement. 

These design features, which are all contained in a single device, therefore provide safety-oriented shutdown functionality (SIL3), as well as electrically isolated 24-230 V AC/DC field signals to the higher-level controls.

A special circuit arrangement makes the input circuit immune to test pulses, which are usually used in distributed control systems (DCS) to monitor the status of signal circuits. The maximum permissible switching voltage is 250 VAC/30 VDC and the maximum permissible switching current is limited to 5A. A standard internal fuse provides short-circuit protection. The typical break time is about 14ms and the make time 7ms. The input of the safety circuit of the SCS 24V DC SIL3 safety relay has a rated control voltage of 24 VDC (+/- 20%) and 35mA current consumption. To ensure rapid onsite replacement, the fuse is easily accessible. 
The design of the monitoring circuit is compelling and has a wide voltage input from 24 V AC/DC to 230 V AC/DC which forms the basis for individual application solutions. 

The safety relay is designed for use in a wide range of temperatures from -25°C to +50 °C without restrictions. Thanks to its compact dimensions of just 113.6 mm x 22.5 mm x 117.2 mm (l/w/h) the SAFESERIES safety relay requires just a small amount of space on DIN TS 35 mounting rails in electrical cabinets (IP20). 

About Weidmüller:

Weidmüller delivers products, solutions and services in the industrial environment of power, signal and data in the areas of machinery, process, energy, transportation, electronics and device manufacturing. They include power supplies, surge protection, Industrial Ethernet, analogue signal conditioning, relays and optos, modular terminal blocks, field wiring, PCB terminals and connectors, electronics housings, ATEX housings, identification material printers and software and tools for cutting, stripping and crimping.   Via a global network of application specialists, Weidmüller also offers engineering services and develops application-specific solutions.

For more information, visit our website at www.weidmuller.co.uk, email us at marketing@weidmuller.co.uk or call us on 0845 094 2006.


Contact Details and Archive...

Print this page | E-mail this page

CSA Sira Test