This website uses cookies primarily for visitor analytics. Certain pages will ask you to fill in contact details to receive additional information. On these pages you have the option of having the site log your details for future visits. Indicating you want the site to remember your details will place a cookie on your device. To view our full cookie policy, please click here. You can also view it at any time by going to our Contact Us page.

Baseefa Ltd

Flame arrester and pressure release valve

23 June 2014

This end of line deflagration flame arrester from Flammer GmbH comes in combination with a self closing manual valve for depressurisation of storage tanks. There is no back pressure during calibration of VR stage II so installation of an orifice plate is not necessary. Consequently, there is  no need for further discussions about orifice plate versus pressure vacuum valve.

New pressure release valve with flame arrester:
*enables a quick pressure balance to atmosphere
*for safe work, maintenance, fuel delivery, control etc..
*reduces water contamination of fuel
*displacement of (VOC) vapours are significantly reduced
*p/v valves with all advantages can be still used
*environmental protection is maintained

The end of line deflagration flame arrester is approved in accordance with EN 12874 and 94/9 EC (ATEX) type 1008-0007-10 and pressure release valve 1006-0005-10


Contact Details and Archive...

Print this page | E-mail this page

CSA Sira Test