This website uses cookies primarily for visitor analytics. Certain pages will ask you to fill in contact details to receive additional information. On these pages you have the option of having the site log your details for future visits. Indicating you want the site to remember your details will place a cookie on your device. To view our full cookie policy, please click here. You can also view it at any time by going to our Contact Us page.

Moore Industries IPX2 I/P transmitter now features removable electronics and switch-selectable output

31 July 2014

Moore Industries two-wire (loop-powered) IPX2 Current-to-Pressure (I/P) Transmitter accepts a current signal from a DCS, PLC or other control system and converts it into a pneumatic signal to provide precise, proportional control of valves, actuators and other pneumatically-controlled devices. The IPX2 now includes 22 direct and reverse output ranges, with switch-selectable reverse output as a standard feature.

The IPX2 is both intrinsically-safe and flameproof approved making it a popular choice for hazardous area and oil and gas installations. The special design, construction and materials allow the model IPX2 with the -NG1 or -NG2 option to be used with natural gas as its pneumatic supply (commonly referred to as sweet gas consisting of up to 20ppm of H2S).

The updated IPX2 also features a new, removable electronics module that makes it easier to maintain and less prone to malfunctions caused by unwanted material entering into the unit. In certain abnormal conditions, liquid slugs can enter the air or gas supply. The removable electronics module speeds the recovery process by allowing the liquid to drain more efficiently. A clog-resistant filtered nozzle and orifice also protects against clogging caused by internal debris.

Learn more about the IPX2 at www.miinet.com/ipx2


Contact Details and Archive...

Print this page | E-mail this page

CSA Sira Test