This website uses cookies primarily for visitor analytics. Certain pages will ask you to fill in contact details to receive additional information. On these pages you have the option of having the site log your details for future visits. Indicating you want the site to remember your details will place a cookie on your device. To view our full cookie policy, please click here. You can also view it at any time by going to our Contact Us page.

Mag Meters approved for use in hazardous areas

18 August 2015

Specifying the correct flow meter for any application is important but becomes absolutely critical in potentially explosive environments. In these situations only meters with the correct ratings and genuine certification must be specified. 

Renowned for innovative flow meter design, Badger Meter has developed a range of intrinsically safe electromagnetic flow meters, sizes 6 – 600mm. Tested and certified to ATEX, CSA and FM, the ModMag M3000 and M4000 offer the ideal solution for applications requiring accurate flow measurement in hazardous environments.

Incorporating the latest developments in micro processing signal conditioning, the M3000 and M4000 have an accuracy of better than ±0.25% with a flow range of 0.03 to 12 m/s. Targeted to a variety of industrial and offshore applications, these full bore meters are virtually unaffected by density, temperature, pressure, and viscosity changes and provide an accurate and reliable long term metering solution for a variety of conductive fluids.

The ruggedly constructed modular design allows flow measurements in Ex-zones  1 (M4000) and 2 (M3000), in either compact format or remote display version. The amplifier housing, made of powder-coated aluminium, is approved to ingress protection class IP67. Programming can be done either with a closed housing thanks to a magnetic pen or with an open housing via three buttons. The four-line display shows all necessary data including actual flow, totalizer and status messages.

A selection of outputs are featured, including Analogue, Pulse and Alarms.

The ModMag M3000 and M4000 are perfectly suited to a range of hazardous applications where accurate flow rate and totalising of conductive fluids are required. For further information contact Bell Flow Systems, the UK representative of Badger Meter.

Contact Details:
+44 (0)1280 817304
sales@bellflowsystems.co.uk
www.bellflowsystems.co.uk

SPE Offshore Europe Stand: 1A120


Contact Details and Archive...

Print this page | E-mail this page

CSA Sira Test