This website uses cookies primarily for visitor analytics. Certain pages will ask you to fill in contact details to receive additional information. On these pages you have the option of having the site log your details for future visits. Indicating you want the site to remember your details will place a cookie on your device. To view our full cookie policy, please click here. You can also view it at any time by going to our Contact Us page.

Get the most from your HART devices

21 October 2020

With more than 40 million HART-enabled instruments installed worldwide in process plants, valuable flow of process and diagnostic HART data is available to be shared with higher level control and asset management systems, but often goes unused. Moore Industries products and solutions can help you use this HART data to deliver cost savings and improve efficiency.

HART Monitoring of Flowmeters to Increase Accuracy

Accurate flowmeter readouts are critical to industries such as iron ore mining that rely on the availability of water for their processes, and are tied directly to their bottom line. To deliver this high level of accuracy and eliminate variables that lead to inaccurate readouts, Moore Industries has the solutions to read your flowmeter’s signal digitally with HART and convert it to MODBUS for communication back to your SCADA system.

HART Data from a Water and Oil Separator

Refineries use multivariable HART capable transmitters for their water and oil separators that ensure water is removed from crude oil before continuing on to first stage processing. Moore Industries can help unlock the full potential of these multivariable transmitters by using HART to extract useful information to be sent back to a DCS or other remote host.

Get the Most Out of Your HART Devices

There’s a good chance that you have HART-enabled field devices in use at your plant or off-site location. The question is: are you getting the most from your HART? If not, Moore Industries can help with products such as isolators with HART pass-through and HART interface devices designed to help you get the most out of your smart HART field instruments.

Got a G-Rail Mount and Only Top-Hat DIN Rails?

Moore Industries G-Type DIN-Rail Adapter for instruments with Top-Hat mounts is a great solution when you only have Top-Hat mounting and G-Type DIN-rails. This adapter works not only for our products, but any company products that have only a Top-Hat rail mounting.

For more information, click the headings above, or visit:

Contact Details and Archive...

Print this page | E-mail this page