This website uses cookies primarily for visitor analytics. Certain pages will ask you to fill in contact details to receive additional information. On these pages you have the option of having the site log your details for future visits. Indicating you want the site to remember your details will place a cookie on your device. To view our full cookie policy, please click here. You can also view it at any time by going to our Contact Us page.

UK chemical company fined £560,000 after employee scalded by boiling water

08 March 2021

A chemical company has been fined £560,000 after an employee was scalded with boiling water while work was being undertaken to clean down part of a production plant in Grangemouth, Scotland in March 2016. CalaChem Limited pleaded guilty to breaching Section 2 of the Health and Safety at Work at Falkirk Sheriff Court.

Image: Geograph.org.uk/Photo © Sandy Gemmill (cc-by-sa/2.0)
Image: Geograph.org.uk/Photo © Sandy Gemmill (cc-by-sa/2.0)

In a statement, the UK Health & Safety Executive (HSE) said the cleaning process at CalaChem’s Grangemouth plant on March 4, 2016 involved involved filling a chemical powder charging chute leading down to a reaction vessel with water that was brought to the boil by immersing a steam hose in it.

The water in the chute was boiled overnight and the following day the employee continued with the clean down process. When he tried to empty the boiling water from the charge chute, he opened a valve expecting the water to drain down into the vessel below. However, the vessel below the chute had been pressurised with nitrogen gas and when the valve was opened the pressure in the vessel was released, the scalding water erupted back up and out of the chute severely scalding the employee, the HSE said.

An investigation by the HSE found that a relatively safe cleaning process of washing down the charge chute with cold water into the vessel below had evolved and changed over time. The process had developed into the practice of overnight boiling of water in the charge chute, while simultaneously pressurising the reaction vessel below as part of a recirculating cleaning cycle. The incremental changes to the cleaning process were not subject to a review of the company’s risk assessment and the danger of pressurising a vessel below a chute of boiling water was not recognised, consequently no control measures were put in place to remove this danger.

The practice of filling the powder charge chute with boiling water has ceased since the incident. The processes to clean down the plant have been risk assessed to introduce new safer worker procedures.

Speaking after the hearing, HSE inspector Gerard McCulloch said: “Those in control of working processes have a responsibility to assess the associated risks. If changes are made, which increase the level of risk, those in control of the workplace have a duty to reduce the risk back down to as low a level as reasonably practicable.

“If the decision to boil water in the chute instead of hosing it down with a cold water had been the subject of a risk assessment, the danger from the pressurised vessel below would have been identified prior to the incident. This would have prevented the employee severe injury and permanent disfigurement.”
In a statement following the ruling, CalacChem Limited said it had settled a civil claim with the injured employee in early 2019. CalaChem added that it remains fully committed to ensuring the health, safety and welfare of all its employees.


More information...

Contact Details and Archive...

Print this page | E-mail this page