This website uses cookies primarily for visitor analytics. Certain pages will ask you to fill in contact details to receive additional information. On these pages you have the option of having the site log your details for future visits. Indicating you want the site to remember your details will place a cookie on your device. To view our full cookie policy, please click here. You can also view it at any time by going to our Contact Us page.

Label printers ATEX approved

01 October 2008

Expo has developed a standard Barcode Label Printer for use in hazardous locations by the pharmaceutical industry. The Expo enclosure houses the print and is purged to remove any internal hazardous gas and pressurised to keep the gas away from the internal print.

Label printers ATEX approved

The snag free self-feed label exits through the front and is easy to replace the label roll when required, all with the minimum of leakage.

Front panel printer controls are operated by Expo through window push buttons.

Several designs to accommodate different manufacturers prints have been produced, which ensures compatibility with the label specified and the host software. The purge system used is the MiniPurge leakage compensation which is ATEX, FM & cULus certified for Zone 1 or 2 or Class I, Div 1 or 2 locations. The complete assembly is ATEX certified.