This website uses cookies primarily for visitor analytics. Certain pages will ask you to fill in contact details to receive additional information. On these pages you have the option of having the site log your details for future visits. Indicating you want the site to remember your details will place a cookie on your device. To view our full cookie policy, please click here. You can also view it at any time by going to our Contact Us page.

Flameproof breather drain

09 April 2009

Redapt Engineering has introduced the model BDU Breather Drain for both Exd Flameproof and Exe Increased Safety installations in Zone 1 and Zone 2 hazardous areas.

Flameproof breather drain
Flameproof breather drain

The model BDU Breather Drain is designed with IP66 ingress protection to be mounted in the bottom of a flameproof enclosure to effectively drain any water from the enclosure whilst allowing the air in the enclosure to breathe with the surrounding atmosphere, minimising moisture build up.

The model BDU can also be mounted in the top of the enclosure to operate as a breather only.

It is available in Stainless Steel (316) and Brass body materials, with optional nickel plating and four thread sizes; M20, M25, 1/2inch NPT and 3/4inch NPT.

The model BDU range has been independently tested and approved for ATEX and IECEx certification by SIRA Test and Certification Ltd.

Contact Details and Archive...

Print this page | E-mail this page