ATEX pressure sensor modules for OEMs
06 July 2009
A range of ready-to-mount pressure sensor modules for OEMs is available that customers can integrate into their machine designs and instrumentation, including equipment that needs to be ATEX-certified for hazardous environments.
Ready-to-mount, ATEX-prepared pressure sensor modules for OEMs
The DSK 701C pressure sensor module from Impress Sensors & Systems is a ready-to-assemble capacitive ceramic pressure sensor module that offers very low pressure ranges (20 bar down to 60mbar) but extremely high overpressure resistance.
The module is ATEX-prepared and already carries Zone 0: II 1G Ex ia IIC T4 certification. This means the OEM can simply install the sensor module straight into a housing or on a machine, knowing that the module itself will require no additional, separate ATEX certification.
The modules are available in gauge and absolute versions with a 4… 20mA output signal. Response time is 120ms (without electronic damping) and operating temperature range is from –40 deg C to +125 deg C. The unit is supplied with a PTFE filter as standard, with a brass venting tube option also available.
Contact Details and Archive...