Humidity transmitter in probe design
29 July 2009
E+E Elektronik have launched the transmitter of the series EE061, in the form of a slim probe, allows for the precise measurement of the relative humidity in air from 0…100 %RH. The EE061 unifies outstanding measurement accuracy with a compact design and a 4 – 20 mA current output.
Humidity transmitter in probe design
The electronic board integrated in the probe is protected from external influences by a potting compound of very high quality and therefore usable from -40 to 60 °C. The transmitter insensitive to dust, dirt and condensation.
All important information for the user is engraved on the 160 mm long sensor probe by means of a laser and will be still legible after several years of use. The supply voltage for the EE061 is 9 – 28 Vdc. Indifferent of how the probe is connected the protection against reverse polarity prevents installation errors. The fixed connection cable is 0.5 meter or 3 meter long.
It is possible to have an optional 4-wire passive (sink) temperature output. The available accessories like a mounting flange and a radiation shield for outdoor applications completes the flexibility of these series.
Contact Details and Archive...