This website uses cookies primarily for visitor analytics. Certain pages will ask you to fill in contact details to receive additional information. On these pages you have the option of having the site log your details for future visits. Indicating you want the site to remember your details will place a cookie on your device. To view our full cookie policy, please click here. You can also view it at any time by going to our Contact Us page.

Connectors for use in hazardous environments

29 October 2009

Independently tested for compliance to ATEX standards for use in Zone 2 and Zone 22 environments, the new EXP series from Bulgin Components is manufactured from a tough high grade UL94V-0 rated Polycarbonate material. The connectors are environmentally sealed to IP68 to provide protection for the most severe of dust and water borne environments. Ambient temperature range is from -20°C to +55°C.

Connectors for use in hazardous environments
Connectors for use in hazardous environments

Compact in design, the connectors are available in 2, 3, 4, 5, 7 and 10 pole variants and in four body styles - cable, in-line cable, panel and flange fixing. Each contact insert is available with either pin or socket contacts and either can be used with any of the body styles to give the maximum choice of combinations.

They are rated up to 18A, 600Vac/dc for 2, 3, 4 and 5 poles, 16A, 430Vac/dc for 7 pole and 10A, 250Vac/dc for 10 poles. The 3, 4, 5 and 7 pole versions have leading earth contacts making them suitable for single or three phase applications.


Contact Details and Archive...

Print this page | E-mail this page