Software to help with ATEX and DSEAR
27 July 2010
ExVeritas has developed a range of free software to assist people involved in the design or verification of ATEX and IEC products or sites with explosive atmospheres.
ExVeritas provide FREE Software to help with ATEX and DSEAR Design and Verification
The software runs 'on line' or can be downloaded as a desktop application under Windows. The software will also run as an iPhone Web Application! Currently the software includes:
FlamCal: ATEX and IEC Flammable Properties Application
This application allows the user to select from several hundred common flammable substances to determine the physical properties that may be required for ATEX or IEC equipment selection or area classification. You would need 30+ A2 ATEX Posters to hold this much information!
IntrinsiCal: ATEX and IEC Intrinsic Safety Circuit Evaluation Application
This application gives an indication of the maximum safe voltage, current, capacitance and inductance to use when designing a circuit to be energy limited or Intrinsically Safe
MESGCal: ATEX and IEC Flameproof Design Application
This application is designed to provide a designer or an inspector with an indication of the correct maximum safe gap for any selected Flamepath type.
SILCal: Safety Integrity Level (SIL) Determination
This application is designed to assist you in the process of determining SIL in accordance with the guidance in IEC 61508. By select event scenarios, a target SIL will be given. The download version can print files for recording assessment.
The software can be run on line without registering or downloading or downloaded as a desktop application from www.exveritas.com. ExVeritas was formed by former ATEX Notified Body owners Sean Clarke and Stephen D'Henin and provides a range of technical and management services which include ATEX Product Design and ATEX and CE Compliance Management.
Contact Details and Archive...