This website uses cookies primarily for visitor analytics. Certain pages will ask you to fill in contact details to receive additional information. On these pages you have the option of having the site log your details for future visits. Indicating you want the site to remember your details will place a cookie on your device. To view our full cookie policy, please click here. You can also view it at any time by going to our Contact Us page.

Non corroding IP 66 pressure switches

21 September 2010

Tamo has released a range of Orion pressure switches with transparent polycarbonate cover for use in severe applications. All the externals are of non-corroding materials such as stainless steel and polycarbonate. The wetted parts are 316L St St and Teflon, which make these switches suitable for a wide variety of applications.

The sensing element is a non metallic nylon reinforced rubber diaphragm. The switches are therefore rugged and suitable to withstand surges, with minimum drift and a very long life. The switches can also be provided with 316L St St diaphragm. The internal set point adjustment cannot be easily tampered with and the actual setpoint is visible externally. The standard micro switch is rated at 5amp 250VAC with other options available.

These IP 66 pressure switches are suitable for a wide range of OEM applications as well as applications in chemical plants, water treatment plants, dyeing industry, cement plants, steel plants or areas where there is excessive dust or harsh environments.

Contact Details and Archive...

Print this page | E-mail this page