Adjustable depth bearing temperature sensors
15 October 2010
4B’s adjustable depth bearing (ADB) temperature sensors have been designed to allow the depth of the probe to be adjustable depending on the application. The ADB series are available with three standard probe lengths of 2, 4 or 8 inches (50, 100 and 200mm), and screw directly into a bearing housing through the existing grease zerk thread. There is no need to remove the sensor for bearing lubrication since each sensor is fitted with its own grease zerk.
The ADB series have NTC type thermistors which allow for continuous temperature monitoring, and they can be connected to a PLC or to a hazard monitoring system, such as 4B’s T500 Hotbus Elite or Watchdog Elite. The ADB Series of bearing temperature sensors have been approved for use in hazardous areas according to ATEX, CSA and IECEx.
Contact Details and Archive...