This website uses cookies primarily for visitor analytics. Certain pages will ask you to fill in contact details to receive additional information. On these pages you have the option of having the site log your details for future visits. Indicating you want the site to remember your details will place a cookie on your device. To view our full cookie policy, please click here. You can also view it at any time by going to our Contact Us page.

Axair ‘ATEX’ fans – axial models

07 July 2011

Axair Fans UK Limited distributes ATEX Category 2 Zone 1 plate mounted & cased axial fans for the ventilation of buildings and rooms in which explosive gasses diluted in air may be present. All products are manufactured by Sodeca and are accredited by Notified Body LOM as satisfying the standards contained in ATEX Directive 94/9/EC

Sodeca HCDF/ATEX and HDF/ATEX plate mounted fans are available in 11 basic impeller diameters, in two operating speeds according to model, and for both single and three phase electrical supplies. The maximum possible air flow rate is 48200m³/h. The motor has to be EEx-d (explosion-proof) type meaning that a flame caused by an explosion within the motor cannot escape to the surrounding atmosphere
Sodeca HCT/ATEX is a cased axial range, the fans being contained within in a tube having flanges at each end. 10 basic sizes of impeller are available to provide air flow rates up to 72000m³/h. Non-sparking construction is achieved using cast aluminium impellers and an aluminium strip positioned within the steel casing.
Sodeca HCT/ATEX range electric motors may be selected as EEx-e (increased safety), which is a reduced cost option of non-incendive construction, or EEx-d (explosion proof).

Contact Details and Archive...

Print this page | E-mail this page