E2S Warning Signals
Impress House
Mansell Road
London
W3 7QH
UK
Telephone : +44 (0) 20 8743 8880
Fax : +44 (0) 20 8740 4200
Email : sales@e2s.com
Web : www.e2s.com
Article archive for E2S Warning Signals;
The GRP corrosion resistant GNEx and the stainless steel STEx alarm sounder families from E2S have been further extended with the addition of new ultra-high output versions. In addition, all models in both families now feature upgraded electronics, which uses high efficiency Class D amplifier technology to deliver a higher sound output at lower current than the previous generation....
E2S Warning Signals design and manufacture alarm horn sounders, Xenon strobe and LED warning beacons and combined signalling units; wide area sounders for site protection and civil emergency warning; PA loudspeakers; break glass and push button manual call points; application-specific status assemblies and junction boxes....
E2S Warning Signals has introduced the next generation of its M range industrial alarm horn sounders. The new MA1F and the MA2F employ the enclosure and mounting as previous MA112 and MA121 versions but now feature enhanced electronics containing the latest in D Class amplifier technology, with lower in-rush current, wider voltage range, lower current consumption and improved alarm tone choice and control....
E2S Warning Signals manufactures an extensive range of manual call points, MCP, designed to be installed in hazardous areas, primarily for the control of fire and gas detection and alarm systems....
Whilst personnel are required to be in and around hazardous locations the demand for effective and reliable audible and visual alarm notification will remain a primary concern for any life safety focused system. However, field devices such as alarm horn sounders or warning beacons can unfortunately be specified using criteria that may not accurately reflect the necessary real-world level of performance....
E2S Warning Signals is featuring its new range of integrated signalling assemblies on Booth 1739 at OTC, May 4-7, Houston, USA. Providing system designers and installers with pre-configured solutions, the new E2S range eliminates the cost of on-site assembly operations whilst guaranteeing that the connections and cabling between devices meet the relevant hazardous area approval requirements and ensuring that all signals are fully tested and certified....
The new Haz. Loc. D2xB1LD3 LED beacon from E2S Warning Signals generates an effective candela rating of 82.1 cd under UL1971 test conditions, making it the brightest UL1971 compliant visual emergency signalling device from any manufacturer suitable for use as part of a public mode fire alarm installation for hazardous areas. ...
E2S Warning Signals is featuring its new range of integrated signalling assemblies on Booth 8620, Hall 8 at ADIPEC, 11-14 November, Abu Dhabi....
E2S has published an all-new version of its web site at e2s.com. One of the key innovations is the intelligent Product Finder search function. The Product Finder enables specifiers to locate the most appropriate products for their application by simple, logical filtering through a hierarchical multiple-choice menu....
The latest addition to the E2S Warning Signals D1x family are the D1xB2 beacons, which offer global approvals with SIL1 and SIL 2 compliance. Light sources are available as either Xenon or LED. Strobes are offered in 5, 10, 15 or 21 Joule Xenon variants with four flash rate options and are approved for private mode fire alarm use to UL1638. ...